- Type rating: 2000VA/1400W
UPS INPUT
- Input Voltage: 220Vac / 230Vac / 240Vac
- Input Voltage range without battery mode: 160-300 Vac
- Frequency: 50/60 Hz +/- 4 Hz
- Power factor: >= 0.96
- Current consumption (max.): 10 A
UPS OUTPUT
- Rated Output Voltage: 220Vac / 230Vac / 240Vac +/- 2%
- Frequency in battery mode: 50/60 Hz +/- 0.2%
- Output Current (at 230Vac): 8.7 A
- Transfer time at mains outage: 0 ms (zero transfer)
- Voltage Waveform: Sinusoidal, THD < 4%
- Overload response (online mode): 140% 30s / 150% 300ms (subsequent, maintenance free)
- Crest factor: 3
- Short-circuit response: Short-circuit-proof
BATTERY
- Type: Sealed, maintenance free
- Rated Voltage: 96 Vdc
- Autonomy time (full load/half load): 10 min. / 30 min. (Runtime extension with external battery packs)
- Overload / Deep discharge protection: Yes
- Recharge time (to 90% of rated capacity): 5 h
COMMUNICATION
- Interfaces: RS232 for UPS configuration, status and measurement levels, SNMP, AS 400, USB (optional)
- Shutdown software: Included for all typical operating systems (Windows, mac, Linux, Unix, Sun etc.)
- Recharge time (acoustical/optical): LED bar graph for UPS load and battery capacity, indicators for mains failure, overload, battery discharge, battery replace, failure
GENERAL DATA
- Efficiency total: >= 85%
- Audible noise (1m distance): < 45 dBA
- Operating temperature range: 0C-40C
- Data lines protection: RJ11 (Phone/Fax/Modem) / RJ45 (Ethernet 10/100 Mbit/s)
- Humidity: 0-90% (non condensing)
- Number of outlets: 6× IEC 320 C13
- Dimensions appr. (W×H×D): 192×340×460 mm
- Weight appr.: 34 kg

- Duo to true On-line/Double-conversion technology Protect C. is well suited for mission-critical applications such as sensitive networks, small computer centers, Intranet and Internet servers, telecom applications as well as for industrial applications
- The Protect C. employs VFI topology to protect loads against all public grid disturbances
- On the input side Sinewave shape current consumption is achieved for all load conditions
- High integrated circuits reduce the number of electric connections and components as well as a robust IGBT module, the result: less and more robust components increasing relability
- An automatic bypass provides security during overload

MAXIMUM CONTROL
- Bar display UPS load and battery capacity and the clearly organized pictogram also informs the operator about the most important aspects of the operating status
- Important UPS data can be transmitted via RS232 interface
- Web browser remote monitoring and multi-server shutdown are all possible with an optional SNMP adapter
- "CompuWatch" shutdown and rebbot software is included for implementing these features

Za odabrani proizvod nije definirana specifikacija.

Za odabrani proizvod nije unesen niti jedan komentar.