Memorija Kingston 8 GB Kit (2x4 GB) DDR4 2666 MHz HyperX Fury Black, HX426C15FBK2/8

Proizvod nije dobavljiv. Potražite neke druge modele koji su zamijenili Memorija Kingston 8 GB Kit (2x4 GB) DDR4 2666 MHz HyperX Fury Black, HX426C15FBK2/8

Proizvođač: Kingston
Šifra: 1285486
Kataloški broj: HX426C15FBK2/8
Jamstvo: 120
Prosječna ocjena: Ocjena 0 0,00 | Glasova: 0
  Ocijeni ovaj proizvod


SPECIFICATIONS

*Power will vary depending on the SDRAM used.

HX426C15FBK2/8

8GB (4GB 512M x 64-Bit x 2 pcs.)

DDR4-2666 CL15 288-Pin DIMM

Continued

kingston.com/hyperx

FEATURES

HyperX

HX426C15FBK2/8

is a kit of two 512M x 64-bit (4GB)

DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory

module, based on eight 512M x 8-bit FBGA components per

module.

Each module kit supports Intel Extreme Memory

Profiles (Intel XMP) 2.0.

Total kit capacity is 8GB. Each

module has been tested to run at DDR4-2666 at a low latency timing

of 15-17-17 at 1.2V.

Additional timing parameters are shown in

the Plug-N-Play (PnP) Timing Parameters section below.

The JEDEC standard electrical and mechanical specifications

are as follows:

CL(IDD)

Row Cycle Time (tRCmin)

Refresh to Active/Refresh

Command Time (tRFCmin)

Row Active Time (tRASmin)

Maximum Operating Power

UL Rating

Operating Temperature

Storage Temperature

15 cycles

45ns(min.)

260ns(min.)

26.25ns(min.)

TBD W*

94 V - 0

0

o

C to +85

o

C

-55

o

C to +100

o

C

JEDEC/XMP TIMING PARAMETERS



JEDEC/PnP: DDR4-2666 CL15-17-17 @1.2V

DDR4-2400 CL14-16-16 @1.2V

DDR4-2133 CL12-14-14 @1.2V


XMP Profile #1: DDR4-2666 CL15-17-17 @1.2V

Power Supply: VDD = 1.2V Typical

VDDQ = 1.2V Typical

VPP - 2.5V Typical

VDDSPD = 2.2V to 3.6V

Nominal and dynami

Osnovne karakteristike
Utor: DDR4
Kapacitet: 8 GB
Pakiranje: Kit (2x4 GB)
Radni takt [MHz]: 2.666


*Unatoč uloženom trudu da damo što bolji i točniji opis, slike i specifikacije, ne možemo garantirati da su svi navedeni podaci točni te ne odgovaramo za eventualne pogreške nastale u opisu proizvoda, slika ili specifikacija. Iste je potrebno provjeriti na stranicama proizvođača ili pošaljite upit našim djelatnicima da provjere.
Ukoliko na našoj stranici otkrijete neistinite odnosno neadekvatne informacije, molimo vas da nam to javite na prodaja[o]protis.hr

Za odabrani proizvod nije unesen niti jedan komentar.

Memorija Kingston 8 GB Kit (2x4 GB) DDR4 2666 MHz HyperX Fury Black, HX426C15FBK2/8 Memorija Kingston 8 GB Kit (2x4 GB) DDR4 2666 MHz HyperX Fury Black, HX426C15FBK2/8 SPECIFICATIONS *Power will vary depending on the SDRAM used. HX426C15FBK2/8 8GB (4GB 512M x 64-Bit x 2 pcs.) DDR4-2666 CL15 288-Pin DIMM Continued kingston.com/hyperx FEATURES HyperX HX426C15FBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2666 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Total kit capacity is 8GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 15-17-17 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows: CL(IDD) Row Cycle Time (tRCmin) Refresh to Active/Refresh Command Time (tRFCmin) Row Active Time (tRASmin) Maximum Operating Power UL Rating Operating Temperature Storage Temperature 15 cycles 45ns(min.) 260ns(min.) 26.25ns(min.) TBD W* 94 V - 0 0 o C to +85 o C -55 o C to +100 o C JEDEC/XMP TIMING PARAMETERS JEDEC/PnP: DDR4-2666 CL15-17-17 @1.2V DDR4-2400 CL14-16-16 @1.2V DDR4-2133 CL12-14-14 @1.2V XMP Profile #1: DDR4-2666 CL15-17-17 @1.2V Power Supply: VDD = 1.2V Typical VDDQ = 1.2V Typical VPP - 2.5V Typical VDDSPD = 2.2V to 3.6V Nominal and dynami<table style="border:none;width:60%"></table>
0.00 0
Kingston
Kingston
99.67 EUR