Nosač za kutiju za Raspberry Pi, Omni Vesa
Proizvod nije dobavljiv. Potražite neke druge modele koji su zamijenili Nosač za kutiju za Raspberry Pi, Omni Vesa
Proizvođač: | Ostali |
Šifra: | 1316469 |
Kataloški broj: | PIM011 |
Jamstvo: | 12 |
Prosječna ocjena: 0,00 | Glasova: 0 |
Ocijeni
ovaj proizvod
|
Isporuka bez kutije i pločice !
The perfect mounting solution for your Raspberry Pi!
Simply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi
either bare or in any of the most popular cases.
The nylon screws provided are long enough to work with all of the relevant cases, though if you find they are protruding too
far from the case of your choice you can easily trim them down using some cutting pliers.
Just remember to use eye protection when cutting!
The OmniVESA supports 75mm and 10mm spacing mounts
The kit contains
1 x OmniVESA
2 x M4 16mm Nylon Knurled Thumbscrews
2 x 5mm Nylon Spacers
2 x M2.5 x 16 nylon screw
3 x M2.5 nuts
Raspberry Pi uncased - use the nylon bolts provided to attach the Pi to the VESA mount using the mounting holes on the Pi itself
Za odabrani proizvod nije definirana specifikacija.
Za odabrani proizvod nije unesen niti jedan komentar.