50kg Body Load Cell Weighing Sensor Resistance Strain Half-bridge Total Weight Scales Sensors Pressure Measurement for arduino
| Proizvođač: | GREATZT |
| Šifra: | 1424248 |
| Kataloški broj: | |
| Jamstvo: | 12 |
| Raspoloživost: |
(Raspoloživo)
|
Prosječna ocjena: 
0,00
| Glasova:
0
|
| Ocijeni
ovaj proizvod
|
4,92 €
**kod nonSEPA transakcija naplaćujemo naknadu banke
već od 0,15 €/mjesečno
Odabrali ste prikaz cijena za gotovinsko plaćanje - prikaži MPC
Specifications:
Size: 34mmX34mm
Internal 1000 Ohm half -bridge strain gauge load cell, the range is 50kg, half -bridge structure.
When measuring, the correct force is applied to the outside of the sensor’s E-shaped beam section (i.e., a strain gauge attached to the center, with a white plastic cover sleeve beam) and the outer edge to form a shear force in the opposite direction, i.e. In the center- the middle of the beam tension bending changes required can occur under pressure, the side of the beam tension by other forces can not have obstacles.
The sensor uses the following three methods:
1, using a sensor with an external resistor full bridge measurement range of the sensor range: 50kg. Higher requirements for external resistors
2, the use of only two sensors full bridge measuring range is a range of two sensors and: 50kgx2 = 100kg
3, the use of four sensors full bridge measuring range is a range of four sensors and: 50kgx4 = 200kg
Za odabrani proizvod nije definirana specifikacija.
Za odabrani proizvod nije unesen niti jedan komentar.
