Slika
Šifra
Proizvod
Cijena
1308752
Arduino spojne žice 150mm muški kontakti, paket, C000036
These are a long flexible jumpers wires of 150 mm with a male connectors on the ends.
They are perfect to use to make projects with the your Arduinos and breadboard.
Features
package contents...
12,00
kn
1308753
Arduino spojne žice 150mm ženski kontakti, paket, WJW012
Arduino-10 jumper wires 150mm female - female
Features
package contents: 10 pcs in plastic bag
5 colours: 2 x red, 2 x blue, 2 x yellow, 2 x green, 2 x black
pre-cut, pre-stripped and pr...
12,00
kn
1314117
Prijemnik i predajnik 433 MHz za Raspberry i Arduino, MX-05V/XD-RF-5V
Wireless Transmitter Modules allow your Arduino to wirelessly comunicate with other arduinos, or with radio frequency (RF) controlled devices that operate in the same frequency (433Mhz in this case).
...
20,00
kn
1314120
Ultrazvučni senzor HC-SR05
The HC-SR05 ultrasonic distance sensor provides an easy way for your projects to measure distances up to 4.5 m.
Specifications
voltage: 4.5 to 5.5 VDC
sound frequency: 40 KHz
measurement...
27,00
kn
1308772
Arduino® kompatibilni senzor zvuka, sa mikrofonom
High sensitivity sound detection module with 2 outputs.
AO - analog output, real-time output voltage signal of the microphone.
DO - the digital output depends on the sound intensity and the threshold ...
27,00
kn
1308802
Spojne žice 40 pins 30 cm female to female jumper wire (flat cable)
This flat cable can easily be stripped apart into a single (or multiple) jumper wires.
Features
contents: 1 pc. of multi-colour flat cable (40 wires)
pre-cut, pre-stripped and pre-formed wir...
27,00
kn
1308804
Spojne žice 40 pins 30 cm male to male jumper wire (flat cable)
This flat cable can easily be stripped apart into a single (or multiple) jumper wires.
Features
contents: 1 pc. of multi-colour flat cable (40 wires)
pre-cut, pre-stripped and pre-formed wir...
27,00
kn
1308803
Spojne žice 40 pins 30 cm male to female jumper wire (flat cable)
This flat cable can easily be stripped apart into a single (or multiple) jumper wires.
Features
contents: 1 pc. of multi-colour flat cable (40 wires)
pre-cut, pre-stripped and pre-formed wir...
28,00
kn
1308760
Arduino® kompatibilni 5 V relej modul
Specifications
operating voltage: 5 VDC
relay current rating: 10 A at 250 VAC, 10 A at 30 VDC (non inductive)
relay contact: C, NO, NC
connection : GND, +5 VDC, control input (5 to 12...
28,00
kn
1308764
Arduino® kompatibilni fotoosjetljivi modul sa 3 pin flat kabelom
Measure light levels with this sensor module.
This module uses a Light Dependant Resistor (LDR) to produce an output voltage that varies with light level.
Connect it straight to your Arduino to buil...
29,00
kn
1308807
Tipkovnica 3 x 4 matrix membrane keypad
A keypad is a simple method of entering user input into your project.
Specifications
dimensions: 7 x 7.7 x 0.1 cm
connection : 3 col - 4 row, 7 pin connection
cable length: 9 cm
weig...
29,00
kn
1308741
3.3 V / 5 V TTL logic level converter module, VMA410
This module allows to use 3.3 V sensors on a 5 V microcontroller.
Features
breadboard compatible
Specifications
low side (3.3 V): 2 inputs and 2 outputs
high side (5 V): 2 inputs and 2 ...
30,00
kn
1314106
Arduino kompatibilni senzor za praćenje linija, Velleman VMA326
The Line Tracking Sensor based on TCRT5000 is an type of infrared reflectance sensor, and is commonly used in line following robots,
it is mounted at the bottom of the robot chassis. The line trackin...
31,00
kn
1314115
Modul za napajanje eksp. pločica, Velleman VMA424
This breadboard 3.3V / 5V power supply module fits the power rails on most breadboards.
It also features a mini USB power port to supply power to external devices.
Specifications
input voltage:...
32,00
kn
1315404
Zaslon za Arduino 4 LED segmenta, Velleman VMA425
With this 4 digit Seven segment display module, you can easily add a 4 number LED readout to your projects.
Useful for making a clock, timer, temperature readout, etc.
Features
serial 4 digit d...
32,00
kn
1308766
Arduino® kompatibilni infrared transmitter modul (2 kom)
This module can be used to send data by using infrared light.
Commonly used in remote controls.
Specifications
max. current: 20 mA
connection: 3 pins, only GND (-) and S is used
weight:...
32,00
kn
1308770
Arduino® kompatibilni RGB LED modul (2 kom)
RGB LED module with on-board current limiting resistors.
Specifications
voltage: 5 VDC
connection : 4 pin male header
pins: GND, RED, GREEN, BLUE
size: 24 x 16 x 16 mm
weight: 2 ...
33,00
kn
1308761
Arduino® kompatibilni active buzzer modul (2 kom)
Specifications
operating voltage: 5 VDC
buzzer frequency: 1.5 to 2.5 KHz
connection : 3 pin, (-) and (S). (+) is not used
dimensions: 25 x 15 x 10 mm
33,00
kn
1308796
Punjač lithium baterija, 1 A (2 kom)
The TP4056 based VMA321 module is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries.
Specifications
input voltage: 4.5 to 5.5 VDC (by on-board USB...
35,00
kn
1308794
Pretvarač napona step up (2.5 V-5 V) 600 mA to USB 5 V (2 kom)
This module provides a stable 5 V from a single Li-Po or two alkaline cells.
Specifications
input voltage range: 2.5 to 5 VDC
output voltage: 5 VDC
connection: solder pads
dimensions...
35,00
kn
1314119
Servo motor mini, VMA600
Specifications
dimensions: 21.5 x 12 x 22.7 mm
voltage: 4.8 to 6 VDC
weight: 9 g
speed: 0.09 sec. for 60° at 6 V
torque: 1.4 kg.cm at 6 V
working temperature: -15° C to 50 °C
...
36,00
kn
1308765
Arduino® kompatibilni hall (holzer) magnetic switch modul (2 kom)
The device includes an on-chip Hall voltage generator for magnetic sensing,
an amplifier that amplifies the Hall voltage, a Schmitt trigger to provide
switching hysteresis for noise rejection, and a...
37,00
kn
1308767
Arduino® kompatibilni mini magnetni reed modul (2 kom)
A Reed contact switch is a normally open contact which closes in the presence of a magnetic field.
This modules contains a 10 Kohm pull-up resistor.
Specifications
voltage: 5 VDC
connection...
38,00
kn
1314104
Arduino kompatibilni senzor za izbjegavanje prepreka, Velleman VMA330
This module is an inexpensive solution for an obstacle avoidance sensor, perfect for robotic projects and very easy
to interface directly with Arduino® and compatible boards.
The module has two pote...
38,00
kn
1308784
Joystick XY modul (2 kom)
This Joystick module provides X and Y axis control for your microcontroller projects.
It also includes a "push down" microswitch.
Specifications
voltage: 3 to 5 VDC
contains : 2 trimmers 10K...
42,00
kn
