Ljepljivi premaz za 3D print, 110 ml, Devil Design
Proizvođač: | Devil design |
Šifra: | 1353380 |
Kataloški broj: | adhesive coating |
Jamstvo: | Nema |
Raspoloživost: | (Dobavljivo) |
Prosječna ocjena: 0,00 | Glasova: 0 |
Ocijeni
ovaj proizvod
|
**kod nonSEPA transakcija naplaćujemo naknadu banke
-10% za gotovinu
već od 0,41 €/mjesečno
*Za prikaz cijena sa popustom (-10%) kliknite ovdje
Adhesive coating is a transparent adhesive in the form of a liquid substance, which serves to increase the adhesion of the printout to the table of 3D printers.
It is designed for ABS, ASA, HIPS, PLA, PET-G, TPU materials. For use on glass or aluminium tables.
Application
Apply a thin layer of adhesive to the printer's COLD table.
Warm the table to the correct working temperature.
Wait for the adhesive to dry, about 2 to 3 minutes.
After 3D printing is complete, wait until the table and the printout has cooled down to room temperature.
The printed object should be carefully undermined with a spatula.
Suggested working temperatures
Material Table temperature
ABS From 90°C to 100°C
ASA From 90°C to 100°C
HIPS From 90°C to 100°C
PLA From 50°C to 60°C
PET-G From 70°C to 80°C
TPU From 20°C to 80°C
Adhesive coating specification
Parameter Scope
Colour Clear
Designed for materials ABS, ACE, HIPS, PLA, PET-G, TPU
Application Glass / aluminium
Water washable Yes
Consistency Sticky
The scent Vanilla
State of aggregation Liquid
Packaging dimensions 36 x 36 x 167 mm
Capacity 110 ml
Osnovne karakteristike | |
---|---|
Boja: | Premaz |
Vrsta: | Premaz |
*Unatoč uloženom trudu da damo što bolji i točniji opis, slike i specifikacije, ne možemo garantirati da su svi navedeni podaci točni te ne odgovaramo za eventualne pogreške nastale u opisu proizvoda, slika ili specifikacija. Iste je potrebno provjeriti na stranicama proizvođača ili pošaljite upit našim djelatnicima da provjere.
Ukoliko na našoj stranici otkrijete neistinite odnosno neadekvatne informacije, molimo vas da nam to javite na prodaja[o]protis.hr
Za odabrani proizvod nije unesen niti jedan komentar.